Introduction to the parameters of large inclination ribs

There are two types of ribs currently used: one is the circular rib conveyor belt usually used for feeders, and the other is used forLarge dipproduct. Compared with the circular skirt, the large inclination sidewall belt has more partitions. The high-incline conveyor has more partitions. The extra partition is like a small silo. This extra partition is The board plays a role in lifting the material to the specified height. The conveyor belt can present a large inclination angle of 30-90 degrees for transportation.

As the main force of large inclination lifting and conveying, the sidewall belt plays a very important role. However, because the angle and partition of the large inclination sidewall belt are large and not fixed, each user has his own needs, and manufacturers will also manufacture different products according to different user needs. So it will be more convenient to choose products after knowing the parameters.

The selection of parameters involves the height of the ribs and the height of the partition, which is the first issue to be considered. The height of the holding side is generally 60-600, and the height of the dividing line is 50-580. You can design a reasonable skirt height according to your hourly transportation.

Generally speaking, the ribs are wavy. The separator has three shapes: T-shaped, TC-shaped, and TCS-shaped. Usually we use the TC type more often, and the T type is a relatively common short skirt, which is relatively small. TCS type is not very common, and the application environment is a relatively large particle size environment such as mines.

In addition to these, it is the choice of the canvas layer inside the large inclination sidewall belt. Common types include cotton, nylon, polyester, steel cord core and other belt cores. You can choose according to the actual situation. The heat resistance of the polyester core is better than that of the nylon core, and the tensile force of the two is the same.